Description
Alkalising Anti-Oxidant Bio Inline mineralising water filter.
These filters are easy to install before any existing water filter system or straight after a reverse osmosis system before the polishing filter.
Water passes through layers of media to add minerals while Alkalizing the water to a higher pH.
pH readings around 8.5 to 9.5 can be achieved with this filter depending on water source and the age of the filter.
Anti-Oxidants help reduce the effects of free radicals in your body.
These filters will help with Oxygen Reduction Potential.
Life span 12 months depending on water quality.
For maximum media contact time the recommended flow rate is 3-LPM. The filters will flow at a faster rate if required but benefits maybe reduced.
290mm length excluding fittings, 65mm width
The filters have 1/4″ female threaded ends to allow for a range of fitting options..
The filters are available with Straight 1/4″ Push-in Tube fittings and Elbow 1/4″ Push-in Tube Fittings or Without fittings.
Maximum pressure 600Kpa
If these filters are to be fitted to a closed system like under the sink and you have a PLV and non return valve the pressure can increase and you will need a PRV fitted . See link below for the PRV valve kits. PRV Valve Or if you are not going to use the system for 24 hours or more then you can turn the water supply tap off and open the sink tap and leave open to vent any extra oxygen.
It is recommended to have a carbon filter after the Alkalising filter.
Replaces: IL148Q
1125Alka-inline
Reviews
There are no reviews yet.