AP9112 Aqua Pure Genuine Premium Filter suits AP9000 systems

Description

Genuine Aqua-Pure™ AP9112 Premium Replacement Water Filter Cartridge.

The Aqua-Pure™ AP9112 is a Replacement Filter for the AP9000 Systems. It is manufactured by 3M Cuno™.

1 micron carbon block, rated for sediment, dirt, rust, Chlorine, Chemical, bad taste, Odour, giardia, cryptosporidium, cyst reduction.

The AP9112 will transform the quality of your water, delivering clean, great-tasting water that is free of common contaminants.

Replaces – CWFAP 9112, C-Cyst-FF, Zip 92321, and AP9000, CC-QAP9R cartridges and systems.

Filter life – approximately 12 months 

Code 9312147000012

Note: All of the filters listed below are fully compatible with AP9000 series filters including the Aqua-Pure™ AP9112.

Simply choose the option which best suits your budget and filtration requirements. 

Key Features

• Cyst Rated
  Complete protection from parasitic cysts including Cryptosporidium, Giardia, and Cyclospora
• NSF/ANSI 42 and NSF/ANSI 53 Certified 
  The models listed below are all certified to reduce aesthetic impurities in water including chlorine and taste and odour. They are also certified to reduce a range of contaminants which can cause negative health effects, like Trihalomethanes. 
• Quick Change
  3M’s revolutionary Quick change System makes changing filters as simple as changing a light bulb. Auto-Shut Off valve stops water flow, allowing users to change filters without turning the water supply off.
• Watermarked
  Watermark certified for your peace of mind.
• No Flushing Needed 
  Pre-Activated filters which means no flushing is required upon installation. However, it is recommended that users run 1-2 litres of water through the system to expel any air.
• Very Fast Flow Rate
  Hi-flow filters capable of supporting high flow rates up 5.7 litres per minute
• A Brand You Can Trust
  3M™ always uses high-quality materials which provides exceptional contaminant removal.

Product Options 

1. 3M™ Aqua-Pure™ AP9112 1 micron

Genuine 3M™ Aqua-Pure™ filter with a very fine double stage 1 micron filter which reduces sediment, cyst parasites, chlorine, chloramines, and disinfection by-products.

Chlorine reduction capacity of 37,854 litres or 12 months (depending on water quality)

2. 3M™ HF20 0.5 micron

Genuine 3M™ Australia HF20 filter (0.5 micron) designed for the reduction of sediment, parasitic cysts, bad tastes and odour, disinfection by-products, volatile organic compounds, and many other chemical contaminants.

This is a high-flow product capable of up to 5.7 litres per minute at maximum chlorine reduction. Ideal for under sink water filtration, ice machines, and cold beverage dispensers.

Chlorine reduction capacity of 34,069 litres or 12 months (depending on water quality).

3. 3M™ HF25 1 micron

Genuine 3M™ Australia HF25 filter (1 micron) designed for the reduction of sediment, parasitic cysts, bad tastes and odour, disinfection by-products, volatile organic compounds, and many other chemical contaminants. Produces delicious, clean-tasting water at a high flow rate.

Chlorine reduction capacity of 37,854 Litres or 12 months (depending on water quality).

4. 3M™ HF25-S

Genuine 3M™ Australia HF25-S 1 micron carbon block filter with scale inhibitor. The perfect choice for consumers in areas with hard water, like South Australia, Inland Queensland, and Western Australia.

Advanced micromet scale protection ideal for protecting coffee machines, ice makers, heating elements, boilers, valves, and flow paths from scale build-up. By protecting your appliances from scale build-up, you can avoid unexpected breakdowns and expensive service calls. 

Suitable for water with Total Hardness up to 140 PPM. Fully NSF Certified for use with coffee machines and in food production.

Chlorine reduction capacity of 37,854 litres, scale reduction capacity of 18,170 litres. Suggested replacement time approximately 12 months or 1500 kg of coffee.