Omnipure K2567 KDF / GAC In Line Water Filter

Description

Omnipure K2567 1m in-line water filter. High-quality American-made inline filter with KDF55 and GAC Carbon. Rated at 1 micron. 

A triple stage filter with sediment pads, Activated Carbon and KDF55 media.

The sediment pads will reduce particulate contaminants including sand, silt, algae, dirt, and slime.

The granular activated carbon reduces bad taste/odour, chlorine, chloramines, volatile organic compounds, pesticides, herbicides, and many other organic chemical contaminants.

The KDF55 media is a patented blend of copper and zinc which changes the form of several contaminants, neutralising them. It is particularly effective at reducing chlorine, chloramines, and lead. Also softens the water and has a bacteriostatic function (reducing the risk of bacterial growth in the filter)

KDF helps the filter perform well at fast flow rates and extends the lifespan of the activated carbon inside the filter.

Rated at 1 micron for added protection

Available with 1/4″ push in fittings or with out fittings (1/4″ female threads).

Omnipure K2567 Compatibility

Will replace a wide range of inline filters including:

• Puretec IL149
• Puretec IL149Q
• Puretec IL150Q
• Everpure EV9100-73
• Everpure IN-10CL1,
• Hydro Life HL-170

Simply choose the fittings which suit your tubing,

Omnipure K2567 Specifications

• Micron rating: 1 micron
• Filter media: KDF and Granular Activated Carbon
• Capacity: 1,500 Gal (5,678 Litres)
• Typical lifespan: 1 year
• Flow Rate: 0.5 GPM
• Maximum Pressure: 125 PSIG
• Temperature: 35-100 F (2-38 C)
• Country of origin: Made in USA
• Dimensions: are 255mm x 50mm (without fittings)
• Dimensions: are 264mm x 50mm (with 1/4″ tube fittings)

These filters are available with quick connect push-in 1/4″ tube fittings or without fittings which has 1/4″ NPT female threaded inlet & outlets.

General Installation and Maintenance Requirements

• Note flow direction of filter
• For quick connect fittings, push scratch free tube end into the fitting until it bottoms.
• Threaded fittings must be wrapped with Teflon tape before installation. Install Teflon taped fittings and tighten firm. Use two wrenches to
  firmly tighten tubing.
• Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
• Replace cartridge when rated capacity (1,500 Gal.) is reached, or when flow becomes too slow.
• Install in compliance with state and local laws and regulations.
  Special Notices
• Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.