Description
Twin Large 20″ System filter housing 1″ Bsp inlet & outlets suits 20″ x 4.5″ filters Ideal for Whole of house, Pumps, Tanks etc. or any where a high flow rate is required eg. house, rural or commercial applications.
Complete two 20″ x 4.5″ housings with 1″ Bsp ports with Stainless Steel mounting bracket & screws and a housing sump spanner.
No Filters are supplied with this system. We have a range of filters for every situation. System takes 20″ x 4.5″ filters.
System has two liquid filled gauges on the outlets sides of each housing to indicate when the filters need to be replaced or when there is a pressure drop.
Larger filters can be used which have a bigger capacity and longer service life compared to standard size filter housings.
Flow rate up to 170 Lpm depending on filter used and water pressure & flow.
Dimensions are 698mm high with bracket x 410mm wide. Max pressure 620 kpa”
Pressure limiting valve PLV 500Kpa are available in the options above.
A PLV pressure limiting valve is recommended on high water pressure supplies where pressure may exceed 550kpa.
If your system has plastic ports do not use pipe dope or other liquid thread sealers. Use only Teflon tape to seal threaded connections
Specifications:
- Flow rate: Up to 170 Lpm depending on filter used and water pressure & flow.
- Dimensions: 610mm high without bracket x 185mm wide.
- Max pressure: 620 kpa
- AS/NZS 3497:1998 Amdt 1 2001 Drinking Water Treatment Units Plumbing Requirements
- Watermark Certificate 052014 for Model ID #IT002530
Reviews
There are no reviews yet.